1. It has improved the inner design turret, and imports 90 PCS beeline bearings for each machine from Japan directly, guaranteed the equipment precision and extended the life of machine (While the normal models only use 40 PCS of beeline bearings).
2. It adopts closed environment, and install all the spare parts inside the rotary turret fully enclosed, prevent the medicine powder(may stick to oil) entering into the inner of rotary turret, and extended the life of machine.
3. It adopts closed environment turret, and solves the troublesome of installing the mould after cleaning frequently, which rooted in the operation time of normal models, was lasted for long time so that the medicine powder was stick to oil. Thus it reduced labor's intensity.
4. It adopts three dimensional control elements; And takes the undersurface plane of dosage as base, so as to eliminate the natural transmutation of the dosing disc and copper saucer. It is uniformity in interval and guarantees the accurate of filling weight, decreasing the phenomena of powder leak and easy to clean. It's the special design at domestic.
5. Enlarge the size of dosing Disc (Enlarged 3cm); Increasing the powder flowing uniformity in the dosing disc, guaranteed the accurate of filling weight, and according to the international standard.
6. The working station cam runs under the good lubricating condition, and equipped with the pressure pulverization oil pump, Maintains the inner lubrication of cam slot to a full extent, and decreasing the abrasion, thus extends the operating life of change Parts (While the cam of the normal model runs on the up side, and the bearings are exposures to oil and running in drying condition).
7. Add the extra function of Capsule control switch. (Control the capsule outside of the machine: It's more safely and quickly. )
8. Add the JOG control system, it's easier to operate and clean the machine.
According to CE, ISO and GMP international standard.
|Specifications NJP -800 |
|Output ||48000Capsules/hour |
|Machine weight ||900Kg |
|840 × 960 × 1800 |
|Power Supply ||380/220V 50Hz |
|Motor power ||Motor1.5kw vacuum1.5kw |
|No. of segment |
|Vacuum ||20m3 /h-0.04-0.08Mpa |
|Dust ||17.6Kpa 180m3 /h |
|Noise ||< 80DB ( A ) |
|Making rate ||Empty capsule100% Full |
|Suitable for |
|0, 1, 2, 3, 4# |
|Filling error ||± 2.5%- ± 3.5% |
1.Nomally shipping steps:
2.Our packing and shipping:
* Inquiry and consulting support.
*Factory inspection available anytime.
*Prompt technical support
*Engineers available to service machinery overseas
*Installation &commissioning,good training for customers.
Q1.What's your delivery method?
A1:We commonly use sea transportation, using container to deliver the goods through Shanghai Port.
Q2.What products can you provide?
A2:Our main product includes powder mixers,granulating equipments,drying equipments,capsule fillers,blister packing machines,tablet/capsule counting filling line,ampoule/vial/oral liquid filling line includes ultrasonic washing machine,sterilization oven,filling capping machine,labeling machine.
Q3. What’s the payment terms?
A3:We will confirm the payment with you when quoting, like FCA, CIF or others.T/T is the main payment, and D/P is acceptable as well.
Q4.How do you ensure your product quality?
A4:We conduct inspections in every production procedure, and for finished products, we will take 100% inspection depend on international standards according to customer's requirements.
Q5:Does the machine power voltage meet buyers' factory power source?
A5: We can do it as your request.
Q6: Is it difficult to install the machine ?
A6: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine; you just need to connect power and compressed air to machine, then begin to operate the machine.
For large size machines, we will take the machine apart, on condition that we do our best to keep the machine easy to assembly.
You will get videos and instructions about installation of machine from us.