Equipment usage:
The tablet deblistering machine is an automatic tablet picking (peeling) machine for recycling drugs from aluminum-plastic blister packaging boards with defects. It is connected in sequence with a 304 stainless steel shell, a micro motor, a first stage reducer, a roller combination, a guide plate combination, and a particle blocking rubber plate, and is equipped with an electrical brake switch and a disconnect switch. A micro motor with a first level reducer drives a set of rollers that simulate the manual peeling of pills, peeling off the entire aluminum-plastic blister panel from the defective packaging board. The medicine particles and packaging materials are separated and collected through guide plates and particle blocking rubber plates.

Semi automatic capsule filling machine, also known as small capsule filling machine or capsule filling machine, is a small to medium batch production equipment used in small and medium-sized pharmaceutical factories, health product factories, hospitals, and clinics. The main manufacturers include international companies such as Syntegon and Schaefer Technologies,
This device integrates capsule turning, separation, filling, and locking functions, and can automatically complete drug filling. The applicable capsule range is from 0 # to 4 #, with a production capacity of 1-15000 capsules per hour, a finished product qualification rate of ≥ 98%, and small size differences. The whole machine is made of stainless steel material, which meets the requirements of pharmaceutical GMP. It is equipped with electronic automatic counting device, variable frequency stepless speed regulation system

GZPK-83 high-speed tablet press is a fully automatic high-speed rotary tablet press, which compacts various granular raw materials into pieces twice by a pair of pre-press wheels and a pair of main press wheels.
The general requirements for the granules are as follows：
If the tablet weight is less than 0.3g, the powder particles screened by 16-20 mesh screens are selected
If the tablet weight is more than 0.3g, the powder particles sifted by 10-14 mesh screens are selected
The water content of particles is 1%~5%.
Semi-solid powder, wet powder, fine powder can not be pressed or pressed forming is not good.

Paste labeling machine
Equipment for paste labeling of 20-1200ml plastic or glass bottles, cylindrical containers in industries such as pharmaceuticals, food, and chemicals
The paste labeling machine is a device used to attach paper labels to various round bottle objects, especially suitable for industries such as food, medicine, and alcohol. It reduces manual labeling processes and improves labeling efficiency by automatically completing processes such as paper separation, gluing, labeling, and overlay. Paste labeling machines are usually equipped with photoelectric self-control systems to maintain coordinated movements, ensuring high labeling quality, smoothness, no wrinkles, and no warping.

The full-automatic vertical zipper bagged powder packaging machine is an automatic equipment used for packing powder or granular materials. It is mainly used for packaging powder and granular materials such as milk powder, Rice noodles, laundry powder, etc. The bag making speed range is 15-70 bags/minute. This device integrates the full process packaging functions of bag making, measuring, filling, coding, bag cutting, and counting, and supports the production of various bag shapes such as pillow bags and vertical bags.
The equipment adopts PLC, servo motor and touch screen as the core control system, which has the characteristics of high precision, intelligence, low noise, etc., simplifying the complexity of traditional mechanical transmission. The independently set sealing temperature and action time parameters can optimize the packaging effect, and the high-precision tooth shaped sealing design ensures sealing.

sketch
The basic principle of freeze-drying is based on the three state changes of water. Water can exist in solid, liquid, and gas states, which can both be converted and coexist with each other. When water is at the triple point (temperature of 0.01 ℃, water vapor pressure of 610.5Pa), water, ice, and water vapor can coexist and be in equilibrium with each other. Under high vacuum conditions, utilizing the principle of sublimation, the moisture in pre frozen materials is directly removed as water vapor through ice sublimation without melting, thus achieving the purpose of freeze-drying. Freeze dried products have a sponge like appearance, no drying shrinkage, excellent rehydration properties, and minimal moisture content. After packaging, they can be stored and transported at room temperature for a long time. Due to its unparalleled advantages over other drying methods

1、 Scope of application:
Suitable for sealing plastic and glass bottles of pesticides, pharmaceuticals, food, cosmetics, oils, etc
2、 Characteristics:
1. New module intelligent design, moisture-proof, anti-corrosion, dustproof, and anti magnetic interference. Long service life, extremely low failure rate, and simple maintenance
2. The host generator adopts the latest imported transistors, CPU module control and protection functions
3. All functional components on the panel are clearly labeled and easy to operate
4. 6 copper wire induction coils at 180 ℃, 4 220V fans, fast sealing speed and good sealing effect
5. The height of the sensing head can be adjusted to adapt to sealed packaging of containers of various heights
6. Fully air-cooled cooling system, efficient and high-speed, capable of 24-hour continuous operation

All equipment is equipped with acrylic security protection devices (effectively protecting the safety of operators). When the operator opens any security door of the equipment, the equipment immediately stops.
purpose
Powder forming machine is mainly used for powder forming of detergents, tea leaves, mulberry tea, fertilizers, disinfectants, ceramics, camphor balls, food, glass powder, tea leaves, milk powder, metallurgy, plant ash, electromagnetic products, bath salts, etc.

The TDP-60D electric single punch tablet press is an experimental tablet press suitable for industries such as pharmaceuticals, chemicals, food, metallurgy, and building materials. It can press various types of powdered granular raw materials into circular or irregular tablets. Mainly used for product trial production and small-scale production in hospital preparation rooms, scientific research institutions, and factory laboratories. This machine has a beautiful appearance, high material utilization rate, reasonable structure, easy operation, small size, high pressure, low noise, and small weight difference.

Application
This packaging machine can package various materials. The bag length can be adjusted as needed. When packaging multiple packaging specifications and bag widths are uncertain, multiple sets of molding machines with different packaging specifications can be configured according to the packaging specifications and weight of the bag. This packaging machine can also be equipped with different material conveying pumps, which are particularly suitable for automatic quantitative filling and packaging of objects at high temperatures. It can effectively improve production efficiency and avoid secondary pollution caused by bacterial invasion. It can be matched with our company's cooling water tank cooling equipment, shaping and drying machines, conveyor belts and other assembly line equipment for production, saving production time and improving overall production efficiency.

1. Automatically packing wettability powder, liquid, cream.
2. Easy and simple to handle

The feature of S-130 packaging machine

Protecting the products completely according to international standards so as to prolong its Shelf-life.
Simple in working process, easy in operating due to the touched screen dialogue, swift in adjusting sizes, it is easy to replace with three-side sealing or four-side sealing as required
The packing is flexible enough for automatically packing wettability powder, liquid, cream, catsup, grain, ect without losing attraction in package design or precision in measurement.
This series specifically targeted to bag packaging requirements and design, can achieve self-supporting bag, flat bag, zipper bag, hang hole and special bag bag filling, sealing.

This series of packaging machines adopts a measurement method combining screw filling and electronic weighing feedback, controlled by a microcomputer, and has functions such as automatic quantification, automatic filling, automatic error correction, counting, and material cleaning.
Suitable for quantitative packaging and filling of powders and powder particle mixtures in industries such as pharmaceuticals, chemicals, food, and agricultural products; Such as: compound condiments, natural condiments, food additives, essence and spices, flour, milk powder, protein powder, solid drinks, white sugar, monosodium glutamate, pesticides, veterinary drugs, laundry powder, enzymes, feed additives, chemicals, new building materials, etc.