Aluminum foil sealing machine
When the packaging containing items is placed on the conveyor belt, the sealing part of the bag is automatically sent between the two sealing belts in operation and brought into the heating zone. The heat of the heating block is transmitted to the sealing part of the bag through the sealing belt, causing the film to melt and soften. Then, it passes through the cooling zone, causing the surface temperature of the film to decrease appropriately. Then, it is rolled by a roller (or printing wheel) to make the upper and lower plastic films of the sealing part stick together and press out a mesh pattern (or printed logo). Finally, the sealed packaging bag is sent out of the machine by a guide rubber belt and the conveyor belt, completing the sealing operation.
Principles and characteristics
1. This sealing machine is mainly used for heating and sealing composite film materials with polyolefin (such as polyethylene, polypropylene, etc.) as the inner layer, as well as sealing plastic bags.
2. Composite film sealing includes sealing materials such as glass paper sealing, aluminum foil sealing, spray aluminum coating sealing, polyester sealing, nylon sealing, polyethylene sealing, polypropylene sealing, etc.
3. The thickness of the film and the width of the seal can be applied within a certain range, achieving good and uniform linear sealing.
4. Regardless of whether it is a large bag, small bag, long bag, or short bag, continuous linear sealing can be performed to achieve satisfactory results.
5. This machine is exquisitely designed and easy to operate.
6. The packaging speed of this machine is fast and efficient.
Usage
1. Choose a flat tabletop, place the machine steadily, and open the chassis legs to make the machine panel easier to observe.
2. Insert the plug on the handheld sensor head into the socket on the panel and tighten it. Pay attention to locating the gap·
3. Insert one end of the power cord plug into the socket on the back panel of the chassis and the other end into the power supply socket. Please make sure to use a single-phase three wire power supply.
4. Turn on the "POWER SW." button on the back panel of the computer case, press the "SWITCHING" button on the panel, wait for the "WARM UP" green indicator light to turn on, and the machine can start working.
5. Press and hold the "Setting BUTTON" button to set the appropriate value, usually between 0.5-2.0 seconds.
6. Place the induction head on top of the container lid and press the start button on the handle. At this time, the red "Heating" indicator light will turn on, indicating that heating is in progress. Do not move the induction head away. After the red "Heating" indicator light turns off, move the induction head again. Wait for the green "WARM UP" indicator light to turn on or for the internal buzzer to beep to prompt before proceeding with the next container sealing operation.
Technical parameters：
model | SR-2000A |
bottle neck diameter | 20mm-100mm (Can be customized) |
bottle height | 0-490mm |
flow packing line speed | 0-10m/min |
max power | 2000W |
sealing speed | 0-200blts/min |
electricity power | 220V， 50/60Hz |
Induction sensor size （L*W*H） | 665mm*170mm *100mm |
machine size | 450mm*450mm*1060mm |
machine weight | 47kg |
Adjustable height on induction head and down | 860mm*1260mm*400mm* |
packaged size | 1060mm*815mm*555mm |
package weight | 78kg |
SUPM is a national high-tech enterprise integrating R&D, production, sales and related services of pharmaceuticals, food, cosmetics industries.