automatic powder hydraulic tablet press
Performance characteristics:
This machine is a four column powder forming machine, which can achieve multi cavity mold pressing and holding, greatly improving production efficiency.. The electrical control system is controlled by a computer system, and the time can be adjusted according to the processing situation. It can achieve both automatic and manual working modes. The working pressure and the stroke range of the slider can be adjusted according to the process requirements, and can complete two process methods of fixed pressure and fixed stroke forming. The process of constant pressure forming has a pressure holding and delayed automatic return action after compression.
The main technical parameters are as follows：
|
Work pressure: 200T |
Top output: 100T |
|
Motor power: 18.7KW |
Maximum diameter of the middle mold: 400mm (customizable) |
|
Loading height: 250mm (customizable) |
Maximum compression diameter: 300mm (customizable) |
|
Production: 3-4 times |
Maximum working pressure: 25MPa |
|
Equipment weight: 3.65T |
Equipment size: 2800 * 1200 * 3300 |
4、 Structure Overview
This machine consists of two main parts: the host and the control structure, which are connected by pipelines and electrical devices to form a whole. The host includes the body, main cylinder, etc; The control mechanism consists of hydraulic pump station (power system) electrical box, mobile operation platform, etc. The structure and functions of each part are described as follows:
1. Body
This machine consists of an upper crossbeam, a sliding worktable, a column, locking nuts and adjusting nuts, a machine base, etc. The slider is equipped with a guide sleeve, which relies on four pillars as the main frame to move the slider up and down. The upper crossbeam and workbench are fixed with locking nuts at both ends. The machine accuracy is adjusted by adjusting the nuts and locking nuts fixed to the upper crossbeam. The slider and the main cylinder piston rod are connected by flanges for users to install molds. The columns and piston rods of the machine are made of 45 steel, which can extend the service life of the machine after treatment.
SUPM is a national high-tech enterprise integrating R&D, production, sales and related services of pharmaceuticals, food, cosmetics industries.