Capsule Filling Machine
Introduction:
The CGN208-D2 capsule filling machine is the latest and most efficient capsule filling equipment developed and improved on our CGN208-D and pellet filling machines. It meets the market demand for filling multiple materials inside a capsule, which can be achieved on one device with high cost-effectiveness. At the same time, the new type of broadcasting bag assembly adopts a cylindrical positioning design, which reduces the time for mold replacement and debugging to only 5-8 minutes. And the new assembly will be simpler, more intuitive, and more convenient compared to the old model in terms of capsule dropping, turning, vacuum separation, and manual operation, with a higher rate of capsule installation. This machine has a novel structure and beautiful appearance. It adopts electrical and pneumatic joint control, equipped with electronic automatic counting device, programmable controller, and frequency converter speed control device. It can respectively complete the actions of capsule positioning, separation, filling, locking, etc., replacing manual filling, reducing labor intensity, improving production efficiency, accurate filling dosage, and meeting the hygiene requirements of pharmaceutical enterprises.
This machine consists of a new type of bag filling and separation mechanism, two types of drug filling mechanisms, a locking mechanism, a variable frequency speed regulation mechanism, pneumatic and electrical control systems, protective devices, as well as vacuum pumps and air pump (optional) accessories.
Both domestically produced or imported mechanism capsules and handmade capsules (handmade capsules that have been fitted with a pill machine) are applicable, with a finished product qualification rate of over 98%.
Voltage: 380V ± 10V, three-phase;
Frequency: 50Hz ± 1 Hz;
Power: 4kw.
Attention: The connection of the main power supply must comply with the regulations of the country where this machine is used.
b) Gas supply requirements
At the cleaning station, it is necessary to add clean compressed air.
Air pressure: 0.4-0.8Mpa;
Airflow rate: 5 m3/h;
c) Vacuum cleaner
The machine should be equipped with a vacuum cleaner or vacuum cleaner during operation;
The displacement is approximately 200m/h.
Vacuum degree: -0.01 Mpa to -0.02 Mpa
d) Vacuum pump
The machine is equipped with a built-in dry vacuum pump for opening capsules.
Vacuum displacement: 6m3/h;
Vacuum pressure: 150mbar.
e) Working environment conditions
Temperature: 18 ℃~24 ℃;
Relative humidity: 40% to 50%;
Environment: anti-corrosion and dustproof
Technical Parameter
productivity | 10000 to 25000 capsules per hour |
Applicable capsule | 00#、0L#、0#、1#、2#、3#、4# |
Filling dosage form | Non sticky powders and small granules |
total power | 4.0KW |
air pressure | 0.03m3/min 0.7Mpa |
vacuum pump | Extraction rate 40m3/h |
Dimensions (length x width x height) | 1.55 × 0.7 × 1.63 (meters) |
Whole machine weight | 400kg |
SUPM is a national high-tech enterprise integrating R&D, production, sales and related services of pharmaceuticals, food, cosmetics industries.